1. High vacuum limiting vacuum less than 5pa, working vacuum less than 35pa.
2. High absorption speed, absorption speed power more than 333L/Sr.
3. Duplex 3D stereo-evaporation technology, eliminating the liquid water very effectively.
4. UK G technology by which the trace water that is show chain, such
as dissolved water, can be removed effectively.
5. Distinctive removing impurities technology filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power.
6.Especially applied to vacuum oiling and drying for power transmission equipments that are over 110kv.
7.Can be operated both on-load and off load.
8. Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after treatment.
9.can be used to dry the electric equipment and input the oil into the electric equipment under the vacuum state.
10..The machine adopts the double-infrared liquid automatic controller, sensitive automatic pressure protector and the high effective equipment for degas, so it is easy to operate.
Comparing with the single-stage vacuum oil purifier, this machine adds ROOTS vacuum system, second stage of separating system to improve the effect of purification which dewater, degas and removes the impurities more quickly, more completely, and makes the oils limiting voltage-withstand value much higher. As the bridge-type vacuum linking system that can purify and also can be an independent vacuum power supply, this machine can treat the electric insulation devices.
|Working Vacuum||Mpa||-0.08 ～-0.099|
|Working Pressure||Mpa||≤ 0.3|
|Temp Range||℃||20 ～80|
|Power Supply||380V/ 50Hz/ 3Phase( As per your requirement)|
|Working Noise||Db||60 - 80 (Depended on the configuation)|
|Dielectric Strength||KV||≥ 75-85|
|Water Content||PPM||≤ 3|
|Gas Content||%||≤ 0.1|
|Particle Size||μ||≤ 3|
|Cleanliness||≤NAS 1638 Grade 5|
Dimensions will be changed if any special type required